Eos Positioning Systems

Eos Positioning Systems receivers can be configured with the Eos Utility software.

Arrow Series

  • Arrow Lite
  • Arrow 100/100+
  • Arrow 200
  • Arrow Gold/Gold+

L1 SBAS

  1. Connect the receiver to a Windows computer via USB cable.

  2. In Eos Utility connect to the receiver: Port → COMX → Connect.

  3. Select Advanced.

  4. In the RX Config tab, set the following:

     Diff Source: SBAS
 SBAS Ranging Mode: NO
    • In the right panel under Diff Includes, ensure SBAS is enabled.

  5. In the SBAS tab, set the following:

     Mode: Manual
 PRN(1): 122
 PRN(2): 122
 PRN(3): 122

  6. Save settings to receiver memory (if you want settings to persist after reboot): File → Save Settings.