Septentrio

Mosaic-X5

The Mosaic-X5 can be configured through the web interface, which can be accessed after connecting the receiver to your computer using a USB cable and visiting the IP address 192.168.3.1 in a browser.

L1 SBAS

1. Connect the receiver to a computer via USB cable and visit the web interface at “192.168.3.1” in a browser.

2. Open the Position view: GNSS → Position and ensure that the SBAS position mode is enabled.

3. Open the Control Panel: Admin → Expert Control → Control Panel.

4. Navigate to the SBAS Corrections options: Navigation → Positioning Mode → SBAS Corrections, and set the following:

    Satellite: S122
    SIS mode: Test
    Navigation mode: MixedSystems
    DO229 version: auto
   

   • Click Ok.

5. Press Save in the pop-up to save the settings to receiver memory (if you want settings to persist after reboot).